Ceresit CS 15 fast silicone is suitable for sanitary seals or other construction sealing applications where mold resistance is required.
You can use it to fill the joints between the ceramic tiles at the corners, to seal the joints between the tiles and the thermal and sanitary installations.
This single-component product hardens even in humid conditions, being suitable for bathrooms, toilets, shower cabins, kitchens, terraces and balconies.
Product advantages:
increased resistance to mold and fungi, impermeability
moisture resistance
quick drying
very good adhesion to non-absorbent surfaces
high resistance to aging, shrinkage, cracks and discoloration
high elasticity
does not contain solvent
resistant to cleaning substances, ozone, ultra-violet radiation and extreme temperatures and can be subjected to the action of water after 2 hours
Method of application:
The product is used on clean, dry, degreased and dust-free surfaces.
The sealant is sold ready to use.
Prepare the joint and protect the surface with masking tape.
Apply the silicone with the gun and finish in a maximum of 5-10 minutes with a spatula previously dipped in soapy water.
Remove the masking tape immediately. The unhardened material is cleaned with solvent, and the hardened material is removed mechanically.
The product forms a film in 14 minutes, and the curing speed at 23C is 1 day for a 3 mm layer and 3 days for 5 mm.