Building gel for nail extension in a pump jar one Drop Gel № 07 - light beige
oneDrop Gel is a medium-thick camouflaging gel for building up, strengthening and correcting the architecture of nails of medium and above average length.
Used for:
- extensions on upper and lower forms
- strengthening and correction of nail architecture in the “dust-free” technique as well as in combined techniques along with harder polymer materials
The gel has medium pigmentation, and its natural shade camouflages the transition from a natural nail to an artificial one, adjusting to the color of the nail plate.
Easy to use and store due to the vacuum dosing system: one press = one drop. The volume of a drop is regulated by pressure put on a dispensing pump.
Advantages of one Drop Gel:
+ comfortable medium-thick consistency
+ cold polymerization
+ natural shades
The main advantage of the gel is excellent self-leveling quality.
Hardness: high. Thickness: medium. Viscosity: medium. Plasticity: low. Pigmentation: medium
! Please note that the transparent protective silicone cap should be removed from the pump before use !
Application technology:
0. Preparation of the nail plate: perform a manicure, give the desired shape to the free edge of the nail
1.Degreasing: mechanically (using a buff) and chemically (using PREP&FINISH and a lint-free wipe) degrease the nail plate
2. Dehydration: apply NAIL FRESHER to the entire nail, let it air dry until a whitish shade appears on the surface of the nail plate
3. Bonding: skip this step when using adhesive bases like PRO BASE-BOND
4. Base coat: apply an even priming layer of PRO BASE-BOND base coat, carefully working through the side walls and the free edge. Polymerize the base coating in a UV lamp for 2-3 minutes, in a LED lamp - for 60 seconds
5. Hardening: using a gel brush, apply a rubbing layer of gel over the entire surface of the nail plate with a 1 mm margin from the cuticle. Apply a second leveling layer on the non-dried gel, taking into account the basic principles of modeling with hard materials. Polymerize in a UV lamp for 2-4 minutes, in a LED lamp - for 90 seconds
Remove the residual stickiness with the help of PREP&FINISH and a lint-free wipe. With a 150/180 grit file, perform step-by-step filing of the form
PRO tips:
- to facilitate the laying out of the material, you can use upper forms or gel tips
- to prevent flaking from the free edge, we recommend miling the natural nail from the inside by 1-2 mm
Building-up: prepare/set forms for each finger in turn. Place a thin layer of the desired length and shape directly on the lower or upper form, model nail architecture with the gel. To create an arch, press the gel for 7-12 seconds, depending on the type and power of the lamp. Then send the nail to the lamp until the gel is completely polymerized: for 60 seconds in a LED lamp, 3-4 minutes in an UV lamp.
Remove the residual stickiness with the help of PREP&FINISH and a lint-free wipe. With a 150/180 grit file, perform step-by-step filing of the form
PRO tip: apply the gel with a margin of min 1 mm from the cuticle to avoid flaking of the material in this area