PROPERTIES
Extremely strong
Extremely flexible
Water resistant
Gap filling
Dishwasher-safe
Resistant to shock and vibrations
Temperature resistant
UV resistant
Acid and solvent-free
Transparent
SUITABLE FOR:
Suitable for repairing porous and non-porous materials such as wood, textile, leather, cork, metal, glass, plastic, rubber, ceramic tiles, stone, cement and many other materials. Suitable for indoors and outdoors.
NOT SUITABLE FOR:
Not suitable for Polypropylene (PP), Polyethylene (PE) and P.T.F.E.
SUITABLE FOR:
Suitable for repairing porous and non-porous materials such as wood, textile, leather, cork, metal, glass, plastic, rubber, ceramic tiles, stone, cement and many other materials. Suitable for indoors and outdoors.
NOT SUITABLE FOR:
Not suitable for Polypropylene (PP), Polyethylene (PE) and P.T.F.E.
Back to top
HANDLING
BEFORE USE:
Working conditions
The materials to be bonded must be clean, dry, free of dust and grease.
Surface requirements
The surface must be dry, clean and free of dust and grease.
Preliminary surface treatment
Surfaces must be clean, dry and free from dust and grease.
Preparation of product
Can be applied directly from the tube using the fine dispensing nozzle.
DURING USE:
Directions for use
Apply the adhesive on one side. Press the parts against each other. Adjustments can be made within 5 minutes. The maximum final bonding strength is reached after approximately 24 hours.
Advice
Loosen the stuck cap under the hot tap and remove any hardened adhesive in the tube cap with a sharp knife. After use, let some adhesive come out of the tube before you screw the cap on it.
AFTER USE:
Stains/residue
Use white spirit for removing wet adhesive residue. Dry adhesive residue can only be removed mechanically.
Storage conditions
Store in tightly closed packaging in a dry, cool and frost-free place.