Vents tt pro 125 rv mixed-flow fan ø 125 mm / 240 m³ + 350 m³
The vents tt and vents tt pro fans are specifically designed for supply and exhaust ventilation of buildings requiring high pressure, powerful air flow and low noise level.
The vents tt pro 125 rv mixed-flow fan is equipped with a single-phase, double-speed motor and thermal overheating protection to prevent overloading of the motor. Thanks to the ball bearings, the life span of the motor is extended to 40,000 hours at non-stop operation.
The pro-variant has both a powerful motor and an optimized design with a casing made of low flammable polypropylene. In addition, the inlet is equipped with a collector to allow a smooth air inlet to the fan
Finally, the diffuser, the profiled impeller and the directing vanes at the outlet of the fan casing ensure that the air flow is distributed in such a way that the best combination of high performance, enhanced pressure and low noise will be achieved
You can control the speed with the built-in switch (option v). It is also possible to use an external switch for this purpose and to extend the possibilities by connecting a timer with adjustable switch-off delay. Both are sold separately
After loosening a number of clamps, the impeller and the engine block are removable, simply remove the central block from the casing and carry out the required maintenance
The fan can be installed at any point and in every corner of the ventilation system. Installing multiple fans within one system is no problem. Also good to know: the fan comes including a cord and plug
Specifications:
Type: exhaust, supply;
Frequency: 50/60 hz;
Voltage: 230 v;
Power consumption: 25-29 w;
Current: 0.11-0.13 a;
Rpm: 1630-2300;
Maximum air capacity: 240-350 m3/h;
Sound pressure level at 3m: 29-34 db;
Spigot size: 125 mm;
Weight: 2.15 kg;
Mounting: inline;
Protection rating: ip x4