Transparent, 2-component, fast-setting epoxy adhesive in a syringe
PURPOSE
The glue does not contain solvents and hardens very quickly - in about 1 minute.
It is mixed in a 1:1 ratio of each of the two components using a special tip (2 pcs.) in the set. After hardening, the material can be machined (sanded, drilled) and painted.
APPLICATION
Bonding and repairing most materials such as metals, wood, ceramics, stone, most plastics (except polypropylene (PP), polyethylene (PE), Teflon (PTFE) and equivalent).
The glue is ideal for use in domestic and other conditions where quick repair of a wide range of household items is required - from shoes to kitchen cabinets, gluing ceramic utensils and others.
USE
Surface preparation The surfaces to be glued must be dry, clean, free of dust, grease and oil. For best results, surfaces should be roughened prior to gluing.
Remove the protective plastic cap from the syringe. Place one of the two blending applicators in place of the protective cap. Expel the product by pressing the plunger of the syringe.
The two components are mixed evenly in the applicator. Apply the adhesive mixture to one of the surfaces
and complete the bonding immediately. Within 1 minute of mixing, the product begins to harden.
STORAGE
The product should be stored at room temperature (10°C – 30°C). For maximum shelf life,
please store the product at the lower end of the temperature range.